How Do I Make a High Resolution Photo for Printing?

here are some guidelines for getting the best quality prints from your photos :

Start with the right size and shape

To get the best settlement when printing, you need to signal to your printer how many pixels per inch ( PPI ) you want it to print. If you send excessively few pixels to the printer it will just make pixels up in an effort to fill the page. If you send excessively many it has to shrink the image smaller. This resize does bad things to persona quality, particularly if the double you are sending to the printer is a JPG because JPGs will not maintain the pixel integrity of your image angstrom well as a PNG charge type will. SEE: How to Make a High Resolution Image for Print or Web

Understand DPI and PPI

300 DPI means “ dots per edge ” as in : the printer is going to spit out 300 little dots of ink for every column inch of your photograph. indeed your trope file should contain the like count of pixels per edge that your printer is going to be printing per edge. ( Keep in beware, some printers may print at a smaller or larger DPI, so you ‘ll want to be aware of that when sizing for prints. )

Get a 300 DPI file

Since we know the printer is going to print at 300 dots per column inch, all we need to do is figure out how many pixels to give the printer. To do that, good multiply 300 by the number of inches the photographic print is going to be. That means in holy order to create a 8 adam 8 print on a 300 DPI printer, you want 2400 x 2400 pixels. If you don ’ deoxythymidine monophosphate feel like doing the mathematics, here ’ s a handy table :

Pixels to Inches Conversion Chart

SIZE IN INCHES SIZE IN PIXELS
3 X 5 900 X 1500
4 X 6 1200 X 1800
5 X 7 1500 X 2100
8 X 8 2400 X 2400
8 X 10 2400 X 3000
8.5 X 11 2550 X 3300
9 X 16 2700 X 4800
11 X 14 3300 X 4200
11 X 16 3300 X 4800

*Currently, the PicMonkey Editor supports a canvas/image size of 6400 x 6400 maximum. If you are using an picture as the background you can use the Resize tool if the picture is already the right shape. If not you ‘ll need to use the Crop tool, which allows you to set the size and condition at the lapp time. In the Crop tool be sure to check the “ scale photograph ” corner and then enter the dimensions in the boxes provided. next, adjust the cultivate area to keep the parts of the trope you want to print, and click “ Apply ” . Use Resize to change your image to 2400 x 2400 px to print at 8 x 8 inches at 300DPI. SEE: VIDEO : Using the Crop Tool & Resize Tool

Apply some Sharpening

Another thing you can do to your double to improve its clearness when printed is to apply some Sharpening to the trope. Prints need more sharpen than calculator monitors, thus apply merely a little besides much. SEE: Basic Edits : exposure, Colors, Sharpen When you apply Sharpen you have to zoom the photograph to 100 %. You can do this by clicking the share menu in the lower correct corner. alone at 100 % do you very see how a lot Sharpen is being applied to your photograph. We suggest finding an area with all right detail such as an center when adjusting the Sharpen amount .

Download as a PNG + print

PNG files compress your image without throwing away information. This means that you can edit the file as many times as you like without worrying about effigy quality. JPG is destructive to image timbre and the more you save over it the worse it gets. typically by the time you get to the printer you are on the 3rd or 4th “ generation ” ( issue of times the tile has been saved over ). JPG is peculiarly hard on text and just plain average to little textbook. therefore, save as PNG to get the best print choice .

Check the DPI before you print

After you download your file to your desktop from PicMonkey, you can double-check the DPI of your image before impression .

On a Mac: 

  1. Open your double in Preview. Go to Tools > Adjust size …
  2. In the Resolution box you ‘ll see the DPI of your trope. If it ‘s different than 300, uncheck the “ Resample effigy ” box and enter your desired DPI ( 300 ) .
  3. The Width and Height fields above should change to the dimensions you desire ( 8×8 inches in this case ) .

On a PC

  1. Locate your file in a finder window.
  2. right suction stop on the filename. Select Properties > Details .
  3. FInd the DPI in the Image section labeled Horizontal and Vertical Resolution .

More resources:

informant : https://oanhthai.com
Category : Tutorial

Trả lời

Email của bạn sẽ không được hiển thị công khai.