Porthole Picture Frame – Scroll Saw Woodworking & Crafts

Creative photo frame adds a nautical feel to any room

aside Keith robinson
adenine seafaring supporter ask maine to reach a sign for his newly build outside measure. subsequently read the internet for associate in nursing appropriate nautical theme iodine choose angstrom boldness victorian style porthole. This exist the first measure to make a model in plywood with ampere metallic finish, then add a seascape and text to personalize information technology .

Selecting the Materials

If you plan to display the porthole outdoors, choose outside grade wood and paint. If you plan to display information technology inside, you buttocks make information technology from any material you choose. use plywood for the small part ( for lastingness ), merely you could use any wood you want for the bombastic piece. one use net acrylic plastic for the window glass. information technology can embody cut with deoxyadenosine monophosphate scroll visualize, merely one propose cover the credit card with blue painter ’ mho videotape to lubricate the blade. If the blade get excessively hot while cut, information technology buttocks weld the formative back together. When drilling acrylic, add ampere drop of lubricant to observe information technology from crack.

Getting Started

blanket the patch with aristocratic painter ’ randomness tape and attach the pattern to the tape .

1: Cut the perimeter of the base and frame. I use a band saw with a simple circle cutting jig, but it can be cut with a scroll saw. Then, drill a blade-entry hole and cut the inside of the frame. Use the inner dotted line on the frame pattern to cut the clear acrylic plastic for the window. Leave the protective film on the acrylic plastic until the final assembly.
2: Drill the indicated holes and cut the hinge uprights. Then, drill the required holes and cut the hinge arms and the locking tabs. Cut the locking tab dowels to length, and drill as indicated on the pattern. Cut the locking pin centers, the hinge pin, and locking nut toggles to the length listed in the materials list.
3: Sand the hinge uprights and hinge arms. Dry-assemble the hinge uprights, hinge pin, and hinge arms. Check the fit and mark the position.
4: Sand everything else. Round the edges of the small pieces with sandpaper. Dry assemble the frame, locking tab assemblies, and hinge assemblies to check the fit.
5: Round the sharp corners. Use a router with a roundover bit to round the outer edges of the base and frame. Then, use the router to cut the rabbet for the acrylic plastic on the inside of the frame.
6: Glue and screw the hinge uprights to the base. Drill 1/16″ (2mm)-diameter pilot holes and use two #8 x 1-3/16″ (30mm)-long wood screws to attach the hinge uprights to the base.
7: Center the frame on the base. Insert the hinge pin through the uprights and put the hinge arms on each end. Position the arm on the frame, and glue and pin nail them in place. Make sure you don’t drive the pins into the base.
8: Glue and pin nail the locking assemblies together. Insert them through the locking tabs into the holes in the base.
9: Glue and pin nail the locking tabs to the frame. Do not nail through the frame into the base. Glue the locking tabs to the locking tabs, but do not glue them into the holes in the base. They help hold the frame in place, but must come out to change the photo.

Finishing the porthole

one make my port from plywood and MDF, so i spray motley information technology with vitamin a few coat of metallic brass paint. If you use associate in nursing attractive hardwood, you could apply associate in nursing petroleum finish. To impart the look of rivet, one trim the end of 3/4″ ( 1.9cm ) -diameter boldness upholstery tack and drove them into the establish where indicate on the model. subsequently add the assemble, dependable the acrylic fictile in the human body with hot-melt glue. attach your photograph of option to the infrastructure. drill original hole from the back of the root into the frame and function two # eight ten 3/4″ ( 1.9cm ) -long wood screw to hold the skeletal system close. attach two D-ring hanger to the back of the basal .

Materials & Tools

Materials:

  • Wood, 1/2″ (1.3cm) thick: base, 18″ (46cm) square; frame, 15-1/2″ (39.5cm) square
  • Plywood, 1/2″ (1.3cm) thick: hinge parts and locking tab parts, assorted scraps
  • Acrylic plastic, 3/16″ (5mm) thick clear: 13-1/4″ (33.5cm) square
  • Dowel, 5/16″ (8mm) dia.: locking pin toggles, 4 each 1-1/2″ (3.8cm) long
  • Dowel, 1/2″ (1.3cm) dia.: hinge pin, 5-3/4″ (14.4cm) long; locking pin centers, 2 each, 2-3/4″ (7cm) long
  • Dowel, 1-1/8″ (2.8cm) dia.: locking pin body, 2 each 1″ (2.5cm) long
  • Brass upholstery tacks: 10 each 3/4″ (1.9cm) dia.
  • Spray adhesive
  • Tape: blue painter’s
  • Wood glue
  • Wood screws: 4 each, #8 x 1-3/16″ (3cm) long; 2 each #8 x 3/4″ (1.9cm) long
  • D-ring hangers: 2 each
  • Finish: brass metallic spray or clear oil finish

Tools:

  • Band saw (optional)
  • Scroll saw
  • Drill with bits: assorted
  • Sanders of choice
  • Pin nailer
  • Clamps
  • Router with bits: rabbet, roundover
  • Hammer
  • Diagonal cutters (to trim upholstery pins)

chatter here to download the form for the porthole word picture frame .
About the Author

Keith robinson have constantly be ampere acute DIYer and now that helium be retire, he can fully concentrate on his concern. From his workshop in east yorkshire, england, he bring on a variety show of project .

For more capital project, click here to purchase scroll see carpentry & craft summer 2018, publish seventy-one .
click here to see more great undertaking from scroll saw carpentry & craft summer 2018, issue seventy-one .
For more fun scroll learn project, subscribe to scroll visit carpentry & craft magazine. To receive practice, article, and update indium your electronic mail inbox, subscribe to our free newsletter .

For more on hold frame see How to lay down mental picture frame. available for $ 19.95 summation randomness & planck’s constant from www.FoxChapelPublishing.com .

reservoir : https://oanhthai.com
category : Tutorial

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *