- Free to connect Bill acceptor and coin acceptor or other device with pluse
- Free to set up time, value, given time, time for warning sound, and coin mode.
- AC 1250W DC 500Watt electrical relay capacity.
- Controls electrical devices ( TV, Massage chair..) power.
- Free to connect hopper for changing
Manual
PAGE-1
JY14-1 Timer Board with Balance Pay Out
| Input Voltage | DC+12V |
| Standby | Display shows:00:00 |
| Relay | normal OPEN ( NO ), Max current load : 15A |
| Accumulated Time | Add meter if receive signals/coins when time is running |
| How it works | |
| Time Control | expose shows 00:00 → cut-in coins→ advertise button start → time runs polish, display shows remaining time, and supply ability to device→it cuts off baron after time runs out |
|
Pause (connect a button) |
Push button pause : it cuts off might when pause, expose shows remaining time. Re-supply might after push button pause again |
| Warning sound | 1-60 seconds adjustable |
| Balance Payout | Push clitoris return, pay out balance . |
| able to return balance before or after use machine | |
| Operating Mode | Please reference to page 3 . |
| Connection Example | Please address to page 4 . |
| Given Time | optional function, Please reference book to page 2 . |
Connection and Position
1 : expose 2 : White lead 3 : Button for START 4 : Button for PAUSE
5 : output- control your device by prison term
6 : output for first grasshopper 7 : output for moment hop-picker
8 : input device :
YELLOW : DC12V, WHITE : input bespeak, BLACK : GND
9 : AC jack-5.5mm*2.1mm
10 : output 5V when first grasshopper ( No.6 ) is not functional
11 : remark for second gear hopper 12 : input for first hop-picker
13 : release for counterweight payout : loss : 5V, White : signal, Black : GND
14-17 : mise en scene Button S4, S3, S2, and S1
Detailed Function
- Operating Mode 01:02: LED lights when balance is available for paying out.
pay out coins by pushing button from No.13. - The order for deducting balance: if No.6 and NO.7 are active, No.6 is the fisrt.
- Warning signature: If balance is available for changing and coins are not paid out after 10 seconds.
– No. 10 output 5V and GND for LED sign.
– Display shows –:E2
– Warning sound for error until pushing button S3.
Power off and on can not remove warning unless pushing button S3.
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — -PAGE-2
Setting
Please follow “A” and “ B ” on Display to set up.
1. Please weight-lift setting button “ S1 ” or “ S2 ” to adjust VALUE.
2. Please press button “ S4 ” to switch adjacent code or ending respect plant .
A. “Input Signal/Coin Quantity”, “ Balance Pay Out”, and “Time”
1.Please bid button “ S4 ”. “ B ” flashes.
Please set up INPUT SIGNAL QUANTITY to active device ( 01-50 ) .
2.Please urge button “ S4 ”, “ A ” flashes. please set up TIME ( 01-99 ) .
3.Please press push button “ S4 ”, “ B ” flashes. please set up TIME ( 01-99 ) .
4.Please press button “ S4 ” 4 TIMES .
5.Please set up TIME for Warning Sound .
6.Please press button “ S4 ”, “ A ” shows 01. please set up SIGNAL COST for PAY OUT 1 COIN ( No.6 )
7.Please imperativeness release “ S4 ”, “ A ” shows 01. please set up SIGNAL COST for PAY OUT 1 COIN ( No.7 )
8.Please crush button “ S4 ” to finish .
Example for STEP 6 and STEP7-SIGNAL COST for PAY OUT 1 COIN:
If set up 01, deduce 1 citation from balance for per 1 coin pay out .
If set up 02, subtract 2 credit from poise for per 1 coin pay out .
If set up 03, withhold 3 credit from poise for per 1 coin pay out .
Optional Function-Given Time
GIVEN TIME: Add time by free if remark signals reach set RATE during meter is running.
Example Setting : remark signal to active device : 01, input signals for given time : 03 give time : 02:10
Add time “ 02:10 ” free if welcome “ 3 signals ” during time is running .
1.Please urge clitoris “ S4 ” 4 TIMES. “ B ” flashes.
Please set up RATE OF INPUT SIGNAL QUANTITY.
2.Please press clitoris “ S4 ”, “ A ” flashes. please set up give TIME .
3.Please press button “ S4 ”, “ B ” flashes. please set up move over TIME .
4.Please press button “ S3 ” to finish .
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — – PAGE-3
Operating Mode Setting
|
display : “ A ” shows CODE, B shows VALUE 1. Please hold on button “ S1 ” and “ S2 ” to get into MODE SETTING. 2. Please use push button “ S1 ” and button “ S2 ” to set up VALUE 3. Please press button “ S4 ” to switch next code or finish value set . |
||
| code | value | routine | officiate |
| 01 | 01 | Start instantaneously |
Time runs down after cut-in coins . bill : Function “ Balance Pay Out ” is not available . |
| 02 | begin by pushing push button |
Time runs down after push button start. |
|
| 02 | 03 | minute : second gear | Max:99:59 |
| 04 | hour : infinitesimal | Max:99:59. Time runs down by seconds for last minute . | |
| 03 | 05 | memory | Runs down runs down after power off and on |
| 06 | Non-memory | Standby after power off and on | |
| 04 | 1-30 | Reset automatically | standby if it has not received any action after setting clock time |
| Default : Bold and underline | |||
Size
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — –
PAGE-4
Connection Example
| No.6 or No.7 | No.11 or No.12 | |||
|
||||
| No.8 – coin acceptor | No.8 – bill acceptor | |||
|
|
|||
| No.10 | No.3 or No.4 | No.13 | ||
|
|
|
||
