Samsung TV Black Screen of Death (You Should Try This Fix FIRST)

so your Samsung television receiver has the black screen of death – the backlight is on, but there ’ s no video. The Samsung TV black screen door of death is fabulously thwart, particularly when it happens on a trade name raw television receiver.

fortunately, this is normally only a impermanent consequence and I ’ ve found a several proved ways to fix it. If you try each and every one of these solutions, I am extremely convinced one of them will work for you.

Samsung TV Black Screen of Death

If your Samsung TV has the black screen of death, you need to reset it. Unplug your TV and wait a full 60 seconds. While the TV is unplugged, press and hold the power button for 30 seconds. After the 60 seconds are up, plug your Samsung TV back in and it should work. Samsung TV Won ’ thyroxine Turn On ( You Sho …

Please enable JavaScriptSamsung TV Won’t Turn On (You Should Try This Fix FIRST) 9 times out of 10, power cycling a television receiver will fix the total darkness blind of death. Of course, there are times when the above solution does not fix the trouble. In that casing, the trouble is normally a hardware issue.

however before we troubleshoot the hardware, there are several other virtual, and slowly troubleshooting steps you should try .

Unplug Samsung television from wall

again, while this fix sounds obvious, unplugging your Samsung television receiver from the wall socket ( power-cycling ) is the most common way to fix the blacken screen of death. The key here is to actually wait the FULL 60 seconds. Have a fiddling bite of solitaire and make certain it ’ mho been at least a minute before plugging it back in.

While the television receiver is unplug, find and  hold the power button on your Samsung TV for 30 seconds. Make sure you are holding the power button on your television receiver, and not your remote control ! This will help to drain any remainder baron left in the television receiver and allows the television receiver to indulgent reset itself. This is different than plainly switching the distant on and off ! Once you plug the TV back in after the 60 seconds, you should see it power back up no problem.

While this cook should work for approximately 90 % of cases, the remaining 10 % can be a bite slippery. If your Samsung television receiver still has the black screen of death, try the fixes detailed below .

Check all HDMI connections

If exponent cycling your Samsung television didn ’ thymine do the whoremaster, then the very next thing you should check are your HDMI connections. If you have anything connected to your TV via HDMI, make sure that the connections are snug!  That means unplugging them and then plugging them back in securely.

With the heighten in popularity of HDMI streaming devices like Roku and Firestick, more and more Samsung television receiver owners are reporting the black blind of end. And it’s often due to a bad HDMI connection. Bad HDMI connections come in a few forms:

  1. Loose HDMI connection
  2. Faulty HDMI port
  3. Bad HDMI cable

If you confirmed the connection is secure, go ahead and double-check that you are on the right Input channel as well. To do this, expect at the back of your television and find the HDMI port you ’ re using. Above the HDMI connection, there should be a label, or some writing on your TV, indicating which HDMI port number it is. Take note of that number ( HDMI “ 2 ” in the case above ).

then grab your Samsung TV remote ( NOT your Roku or Firestick remote, if you ’ re using those ) and snap SOURCE ( or INPUT ). You ’ ll likely motivation to toggle this several times until you find the correspond stimulation on your television

If the connection is plug, and you ’ re on the chastise input signal, I would try connecting to a different HDMI port. Samsung TVs much have multiple ports, sometimes up to four ! Use a different port and see if you get the video back.

If not, the last possible fix here is to replace the HDMI cable you ’ re using and see if that does the antic .

issue with Samsung television receiver backlight

If your Samsung ’ mho television receiver is on ( the office light is green and you hear audio ), but there ’ s no picture on the screen, it ’ s probable because one of the LED might strips on the backlight is faulty. To troubleshoot the issue, make sure the TV is powered on, and then take a flashlight (the flashlight on your phone will work too) and shine it close to the TV’s screen. I suggest turning off all the lights so it ’ s easier to see. If the screen door is working, you will see a very dim image on the television. Use the remote control to see if the television receiver responds to commands. I suggest testing the volume and stimulation keys on the outback besides. You might need to move the light around to find where the TV’s user interface is on the screen. If you hear audio cues, you’ll likely see a faint image too.  If, when you shine a flashlight on the riddle you see a dimmed persona, and the distant is allowing you to control the television receiver, that ’ mho commodity news program. It means the TV’s T-CON and mainboard are working as they should. In that case, the problem is most likely with the television ’ s LED backlights. NOTE : while some of a television ’ second components are easy and cheap to replace on your own, disassembling a TV will likely void the warranty. If your television receiver is placid under guarantee, I suggest contacting Samsung for far aid.

Having said that, some simple DIY fixes can normally bring your television receiver back to life, and you won ’ t need to pay much for technicians or repairs. Below I’ll cover some of the components that are most likely to cause the black screen of death.  There ’ mho besides a gamble the stallion panel is broken and buying a refilling screen is dearly-won and normally not worth it. Buying a brand-new TV is often cheaper than paying for a panel replacement. But it ’ randomness rare for a television ’ mho empanel to break, unless it ’ sulfur been physically damaged by wedge.

Replacing Samsung LED Backlight Strips

The backlights on TVs consist of strips of LED lights. If one of the lights in the strip breaks, the entire strip won’t work. It ’ randomness easier to replace the entire airstrip than it is to replace a single malfunctioning LED lighter. You can order a set of backlight LED strips for your exact TV model online.  Replacing the LED backlight strips is a bit of a fuss because there are lots of screws to remove and you need to disassemble all the bezels.

You will also need to remove the glass panel, which is fragile and very expensive to replace.  In other words, I would only recommend replacing LED backlight strips if you’re familiar with disassembling TVs. If you don ’ t want to take on the project, you could use a Samsung technician or television receiver compensate shop to do it for you, although it will cost more.

In most cases replacing the LED backlight strips will cost between $100 and $200, depending on how many strips you need. The majority of TVs have 9 to 12 LED backlight strips, but some will have more depending on the size. Replacing the LED backlight strips on your television receiver is a hazardous project but it could fix the blacken screen of death and save you hundreds of dollars on official repairs. ( It ’ south besides a good option if one side of your television receiver has a picture and the early does not, or if the screen is very blur. )

Replacing the T-CON Board

In the casing where you don ’ t see any visualize, even with a idle shining directly onto the screen, it ’ s probable the T-CON board on your Samsung television receiver is broken. The T-CON board on a TV is responsible for creating the image on the screen.  While it might seem daunting at first base, replacing the T-CON board on television is a fairly easy DIY project. You can find replacement T-CON boards by searching for your TV’s model number on online marketplaces like eBay or Amazon. T-CON boards are not very expensive, normally under $ 100. fortunately, replacing a T-CON dining table on a television is much easier than replacing the LED backlights. You only need to remove the rear panel of the TV, disconnect the ribbon cables on the T-CON board, remove the screws, pop it out, and place the new one in the same location.  It only takes a few minutes. normally there are only four screws and two to three decoration cables connecting to the dialog box .

Samsung television receiver support

If nothing has worked for you up to this point, it ’ s decidedly deserving reaching out to Samsung support. They offer a variety of service methods, from in-home service to mail-in options. The cost for this service will vary depending on the final diagnosis and whether or not the work is covered under warranty. But the good thing is you ’ ll get a attest Samsung technician to take a look .

Samsung television guarantee

You can besides check on-line to see if your television is covered under Samsung ’ s guarantee. Unfortunately Samsung TV warranties typically only last 1 year, and most of the black screen of death cases I’m hearing of are on TVs that are several years old. inactive worth a dart.

conclusion

If you ’ re experiencing the Samsung TV black blind of death, don ’ deoxythymidine monophosphate panic, there are respective raise fixes you can try to get things back improving and run :

  • Power cycle your Samsung TV
  • Check all your HDMI connections
  • See if your TV’s backlight is still working
  • The issue may be with the screen itself:
    • Broken backlights OR
    • Broken T-CON board
  • Contact Samsung TV support
  • Check your Samsung warranty

Hopefully one of these fixes worked for you. Were you able to fix the bootleg blind of death on your Samsung television receiver ? If then, let me know how in the comments below !

source : https://oanhthai.com
Category : Tutorial

Trả lời

Email của bạn sẽ không được hiển thị công khai.